Request

How to prepare logs for sawing

Timber from your own woodland, plot or tree felling can be put to good use on site. A few simple steps make sawing easier and spare the saw.

Check the wood for metal

Trees that grew by fences, in orchards or near buildings often have nails, wire, hooks or fragments in the trunk. Metal damages the saw and is dangerous. Remove anything you can see and clearly mark places where something may be hidden.

Clean the logs

Soil, sand and small stones pressed into the bark quickly blunt the saw. Clean any logs that were dragged along the ground, and load them so they stay clean in transport.

Count and measure

It helps to know the species, the number of logs and their approximate length. Longer logs give more options, because you cannot cut a long rafter from a short log.

Write a cutting list

Think about what you want: boards for a summer house, beams, squared timber, battens. Note the thicknesses, widths, lengths and how many pieces you need. On site it is easier to agree what can be cut from the actual logs.

After sawing

Stack freshly sawn boards for drying straight away: on bearers, with spacers and under a cover. There is more on this in the guide to storing timber.

Read next

Back to the guide
  • How to order roof framing

    What to prepare before ordering roof framing: the timber schedule from your plans, the parts of the roof, cutting allowances, treatment and timing.

    4 min read

  • How to store timber on site

    Bearers, spacers and a cover instead of airtight plastic: how to stack boards and beams so they dry evenly and stay straight.

    3 min read

Choose a number